Python operator 模块,floordiv() 实例源码

我们从Python开源项目中,提取了以下50个代码示例,用于说明如何使用operator.floordiv()

项目:radar    作者:amoose136    | 项目源码 | 文件源码
def test_modulus_basic(self):
        dt = np.typecodes['AllInteger'] + np.typecodes['Float']
        for dt1, dt2 in itertools.product(dt, dt):
            for sg1, sg2 in itertools.product((+1, -1), (+1, -1)):
                if sg1 == -1 and dt1 in np.typecodes['UnsignedInteger']:
                    continue
                if sg2 == -1 and dt2 in np.typecodes['UnsignedInteger']:
                    continue
                fmt = 'dt1: %s, dt2: %s, sg1: %s, sg2: %s'
                msg = fmt % (dt1, dt2, sg1, sg2)
                a = np.array(sg1*71, dtype=dt1)[()]
                b = np.array(sg2*19, dtype=dt2)[()]
                div = self.floordiv(a, b)
                rem = self.mod(a, b)
                assert_equal(div*b + rem, a, err_msg=msg)
                if sg2 == -1:
                    assert_(b < rem <= 0, msg)
                else:
                    assert_(b > rem >= 0, msg)
项目:radar    作者:amoose136    | 项目源码 | 文件源码
def test_float_modulus_roundoff(self):
        # gh-6127
        dt = np.typecodes['Float']
        for dt1, dt2 in itertools.product(dt, dt):
            for sg1, sg2 in itertools.product((+1, -1), (+1, -1)):
                fmt = 'dt1: %s, dt2: %s, sg1: %s, sg2: %s'
                msg = fmt % (dt1, dt2, sg1, sg2)
                a = np.array(sg1*78*6e-8, dtype=dt1)[()]
                b = np.array(sg2*6e-8, dtype=dt2)[()]
                div = self.floordiv(a, b)
                rem = self.mod(a, b)
                # Equal assertion should hold when fmod is used
                assert_equal(div*b + rem, a, err_msg=msg)
                if sg2 == -1:
                    assert_(b < rem <= 0, msg)
                else:
                    assert_(b > rem >= 0, msg)
项目:zippy    作者:securesystemslab    | 项目源码 | 文件源码
def test_division(self):
        t = timedelta(hours=1, minutes=24, seconds=19)
        second = timedelta(seconds=1)
        self.assertEqual(t / second, 5059.0)
        self.assertEqual(t // second, 5059)

        t = timedelta(minutes=2, seconds=30)
        minute = timedelta(minutes=1)
        self.assertEqual(t / minute, 2.5)
        self.assertEqual(t // minute, 2)

        zerotd = timedelta(0)
        self.assertRaises(ZeroDivisionError, truediv, t, zerotd)
        self.assertRaises(ZeroDivisionError, floordiv, t, zerotd)

        # self.assertRaises(TypeError, truediv, t, 2)
        # note: floor division of a timedelta by an integer *is*
        # currently permitted.
项目:krpcScripts    作者:jwvanderbeck    | 项目源码 | 文件源码
def test_modulus_basic(self):
        dt = np.typecodes['AllInteger'] + np.typecodes['Float']
        for dt1, dt2 in itertools.product(dt, dt):
            for sg1, sg2 in itertools.product((+1, -1), (+1, -1)):
                if sg1 == -1 and dt1 in np.typecodes['UnsignedInteger']:
                    continue
                if sg2 == -1 and dt2 in np.typecodes['UnsignedInteger']:
                    continue
                fmt = 'dt1: %s, dt2: %s, sg1: %s, sg2: %s'
                msg = fmt % (dt1, dt2, sg1, sg2)
                a = np.array(sg1*71, dtype=dt1)[()]
                b = np.array(sg2*19, dtype=dt2)[()]
                div = self.floordiv(a, b)
                rem = self.mod(a, b)
                assert_equal(div*b + rem, a, err_msg=msg)
                if sg2 == -1:
                    assert_(b < rem <= 0, msg)
                else:
                    assert_(b > rem >= 0, msg)
项目:krpcScripts    作者:jwvanderbeck    | 项目源码 | 文件源码
def test_float_modulus_roundoff(self):
        # gh-6127
        dt = np.typecodes['Float']
        for dt1, dt2 in itertools.product(dt, dt):
            for sg1, sg2 in itertools.product((+1, -1), (+1, -1)):
                fmt = 'dt1: %s, dt2: %s, sg1: %s, sg2: %s'
                msg = fmt % (dt1, dt2, sg1, sg2)
                a = np.array(sg1*78*6e-8, dtype=dt1)[()]
                b = np.array(sg2*6e-8, dtype=dt2)[()]
                div = self.floordiv(a, b)
                rem = self.mod(a, b)
                # Equal assertion should hold when fmod is used
                assert_equal(div*b + rem, a, err_msg=msg)
                if sg2 == -1:
                    assert_(b < rem <= 0, msg)
                else:
                    assert_(b > rem >= 0, msg)
项目:dsfaker    作者:Dubrzr    | 项目源码 | 文件源码
def __init__(self, *generators):
        super().__init__(*generators, reduce_lambda=operator.floordiv)
项目:pudzu    作者:Udzu    | 项目源码 | 文件源码
def number_of_args(fn):
    """Return the number of positional arguments for a function, or None if the number is variable.
    Looks inside any decorated functions."""
    try:
        if hasattr(fn, '__wrapped__'):
            return number_of_args(fn.__wrapped__)
        if any(p.kind == p.VAR_POSITIONAL for p in signature(fn).parameters.values()):
            return None
        else:
            return sum(p.kind in (p.POSITIONAL_ONLY, p.POSITIONAL_OR_KEYWORD) for p in signature(fn).parameters.values())
    except ValueError:
        # signatures don't work for built-in operators, so check for a few explicitly
        UNARY_OPS = [len, op.not_, op.truth, op.abs, op.index, op.inv, op.invert, op.neg, op.pos]
        BINARY_OPS = [op.lt, op.le, op.gt, op.ge, op.eq, op.ne, op.is_, op.is_not, op.add, op.and_, op.floordiv, op.lshift, op.mod, op.mul, op.or_, op.pow, op.rshift, op.sub, op.truediv, op.xor, op.concat, op.contains, op.countOf, op.delitem, op.getitem, op.indexOf]
        TERNARY_OPS = [op.setitem]
        if fn in UNARY_OPS:
            return 1
        elif fn in BINARY_OPS:
            return 2
        elif fn in TERNARY_OPS:
            return 3
        else:
            raise NotImplementedError("Bult-in operator {} not supported".format(fn))
项目:chainer-deconv    作者:germanRos    | 项目源码 | 文件源码
def test_floordiv_scalar(self):
        with testing.NumpyError(divide='ignore'):
            self.check_array_scalar_op(operator.floordiv)
项目:chainer-deconv    作者:germanRos    | 项目源码 | 文件源码
def test_broadcasted_floordiv(self):
        with testing.NumpyError(divide='ignore'):
            self.check_array_broadcasted_op(operator.floordiv)
项目:web_ctp    作者:molebot    | 项目源码 | 文件源码
def test_division(self):
        t = timedelta(hours=1, minutes=24, seconds=19)
        second = timedelta(seconds=1)
        self.assertEqual(t / second, 5059.0)
        self.assertEqual(t // second, 5059)

        t = timedelta(minutes=2, seconds=30)
        minute = timedelta(minutes=1)
        self.assertEqual(t / minute, 2.5)
        self.assertEqual(t // minute, 2)

        zerotd = timedelta(0)
        self.assertRaises(ZeroDivisionError, truediv, t, zerotd)
        self.assertRaises(ZeroDivisionError, floordiv, t, zerotd)

        # self.assertRaises(TypeError, truediv, t, 2)
        # note: floor division of a timedelta by an integer *is*
        # currently permitted.
项目:PyDataLondon29-EmbarrassinglyParallelDAWithAWSLambda    作者:SignalMedia    | 项目源码 | 文件源码
def test_binops(self):
        ops = [operator.add, operator.sub, operator.mul, operator.floordiv,
               operator.truediv, pow]
        scalars = [-1, 1, 2]
        idxs = [RangeIndex(0, 10, 1), RangeIndex(0, 20, 2),
                RangeIndex(-10, 10, 2), RangeIndex(5, -5, -1)]
        for op in ops:
            for a, b in combinations(idxs, 2):
                result = op(a, b)
                expected = op(Int64Index(a), Int64Index(b))
                tm.assert_index_equal(result, expected)
            for idx in idxs:
                for scalar in scalars:
                    result = op(idx, scalar)
                    expected = op(Int64Index(idx), scalar)
                    tm.assert_index_equal(result, expected)
项目:PyDataLondon29-EmbarrassinglyParallelDAWithAWSLambda    作者:SignalMedia    | 项目源码 | 文件源码
def test_arith(self):
        self._test_op(self.panel, operator.add)
        self._test_op(self.panel, operator.sub)
        self._test_op(self.panel, operator.mul)
        self._test_op(self.panel, operator.truediv)
        self._test_op(self.panel, operator.floordiv)
        self._test_op(self.panel, operator.pow)

        self._test_op(self.panel, lambda x, y: y + x)
        self._test_op(self.panel, lambda x, y: y - x)
        self._test_op(self.panel, lambda x, y: y * x)
        self._test_op(self.panel, lambda x, y: y / x)
        self._test_op(self.panel, lambda x, y: y ** x)

        self._test_op(self.panel, lambda x, y: x + y)  # panel + 1
        self._test_op(self.panel, lambda x, y: x - y)  # panel - 1
        self._test_op(self.panel, lambda x, y: x * y)  # panel * 1
        self._test_op(self.panel, lambda x, y: x / y)  # panel / 1
        self._test_op(self.panel, lambda x, y: x ** y)  # panel ** 1

        self.assertRaises(Exception, self.panel.__add__, self.panel['ItemA'])
项目:PyDataLondon29-EmbarrassinglyParallelDAWithAWSLambda    作者:SignalMedia    | 项目源码 | 文件源码
def test_arith_flex_panel(self):
        ops = ['add', 'sub', 'mul', 'div', 'truediv', 'pow', 'floordiv', 'mod']
        if not compat.PY3:
            aliases = {}
        else:
            aliases = {'div': 'truediv'}
        self.panel = self.panel.to_panel()

        for n in [np.random.randint(-50, -1), np.random.randint(1, 50), 0]:
            for op in ops:
                alias = aliases.get(op, op)
                f = getattr(operator, alias)
                exp = f(self.panel, n)
                result = getattr(self.panel, op)(n)
                assert_panel_equal(result, exp, check_panel_type=True)

                # rops
                r_f = lambda x, y: f(y, x)
                exp = r_f(self.panel, n)
                result = getattr(self.panel, 'r' + op)(n)
                assert_panel_equal(result, exp)
项目:PyDataLondon29-EmbarrassinglyParallelDAWithAWSLambda    作者:SignalMedia    | 项目源码 | 文件源码
def test_binary_operators(self):

        # skipping for now #####
        raise nose.SkipTest("skipping sparse binary operators test")

        def _check_inplace_op(iop, op):
            tmp = self.bseries.copy()

            expected = op(tmp, self.bseries)
            iop(tmp, self.bseries)
            assert_sp_series_equal(tmp, expected)

        inplace_ops = ['add', 'sub', 'mul', 'truediv', 'floordiv', 'pow']
        for op in inplace_ops:
            _check_inplace_op(getattr(operator, "i%s" % op),
                              getattr(operator, op))
项目:ouroboros    作者:pybee    | 项目源码 | 文件源码
def test_division(self):
        t = timedelta(hours=1, minutes=24, seconds=19)
        second = timedelta(seconds=1)
        self.assertEqual(t / second, 5059.0)
        self.assertEqual(t // second, 5059)

        t = timedelta(minutes=2, seconds=30)
        minute = timedelta(minutes=1)
        self.assertEqual(t / minute, 2.5)
        self.assertEqual(t // minute, 2)

        zerotd = timedelta(0)
        self.assertRaises(ZeroDivisionError, truediv, t, zerotd)
        self.assertRaises(ZeroDivisionError, floordiv, t, zerotd)

        # self.assertRaises(TypeError, truediv, t, 2)
        # note: floor division of a timedelta by an integer *is*
        # currently permitted.
项目:lambda-numba    作者:rlhotovy    | 项目源码 | 文件源码
def test_modulus_basic(self):
        dt = np.typecodes['AllInteger'] + np.typecodes['Float']
        for dt1, dt2 in itertools.product(dt, dt):
            for sg1, sg2 in itertools.product((+1, -1), (+1, -1)):
                if sg1 == -1 and dt1 in np.typecodes['UnsignedInteger']:
                    continue
                if sg2 == -1 and dt2 in np.typecodes['UnsignedInteger']:
                    continue
                fmt = 'dt1: %s, dt2: %s, sg1: %s, sg2: %s'
                msg = fmt % (dt1, dt2, sg1, sg2)
                a = np.array(sg1*71, dtype=dt1)[()]
                b = np.array(sg2*19, dtype=dt2)[()]
                div = self.floordiv(a, b)
                rem = self.mod(a, b)
                assert_equal(div*b + rem, a, err_msg=msg)
                if sg2 == -1:
                    assert_(b < rem <= 0, msg)
                else:
                    assert_(b > rem >= 0, msg)
项目:lambda-numba    作者:rlhotovy    | 项目源码 | 文件源码
def test_float_modulus_roundoff(self):
        # gh-6127
        dt = np.typecodes['Float']
        for dt1, dt2 in itertools.product(dt, dt):
            for sg1, sg2 in itertools.product((+1, -1), (+1, -1)):
                fmt = 'dt1: %s, dt2: %s, sg1: %s, sg2: %s'
                msg = fmt % (dt1, dt2, sg1, sg2)
                a = np.array(sg1*78*6e-8, dtype=dt1)[()]
                b = np.array(sg2*6e-8, dtype=dt2)[()]
                div = self.floordiv(a, b)
                rem = self.mod(a, b)
                # Equal assertion should hold when fmod is used
                assert_equal(div*b + rem, a, err_msg=msg)
                if sg2 == -1:
                    assert_(b < rem <= 0, msg)
                else:
                    assert_(b > rem >= 0, msg)
项目:deliver    作者:orchestor    | 项目源码 | 文件源码
def test_modulus_basic(self):
        dt = np.typecodes['AllInteger'] + np.typecodes['Float']
        for dt1, dt2 in itertools.product(dt, dt):
            for sg1, sg2 in itertools.product((+1, -1), (+1, -1)):
                if sg1 == -1 and dt1 in np.typecodes['UnsignedInteger']:
                    continue
                if sg2 == -1 and dt2 in np.typecodes['UnsignedInteger']:
                    continue
                fmt = 'dt1: %s, dt2: %s, sg1: %s, sg2: %s'
                msg = fmt % (dt1, dt2, sg1, sg2)
                a = np.array(sg1*71, dtype=dt1)[()]
                b = np.array(sg2*19, dtype=dt2)[()]
                div = self.floordiv(a, b)
                rem = self.mod(a, b)
                assert_equal(div*b + rem, a, err_msg=msg)
                if sg2 == -1:
                    assert_(b < rem <= 0, msg)
                else:
                    assert_(b > rem >= 0, msg)
项目:deliver    作者:orchestor    | 项目源码 | 文件源码
def test_float_modulus_roundoff(self):
        # gh-6127
        dt = np.typecodes['Float']
        for dt1, dt2 in itertools.product(dt, dt):
            for sg1, sg2 in itertools.product((+1, -1), (+1, -1)):
                fmt = 'dt1: %s, dt2: %s, sg1: %s, sg2: %s'
                msg = fmt % (dt1, dt2, sg1, sg2)
                a = np.array(sg1*78*6e-8, dtype=dt1)[()]
                b = np.array(sg2*6e-8, dtype=dt2)[()]
                div = self.floordiv(a, b)
                rem = self.mod(a, b)
                # Equal assertion should hold when fmod is used
                assert_equal(div*b + rem, a, err_msg=msg)
                if sg2 == -1:
                    assert_(b < rem <= 0, msg)
                else:
                    assert_(b > rem >= 0, msg)
项目:kbe_server    作者:xiaohaoppy    | 项目源码 | 文件源码
def test_division(self):
        t = timedelta(hours=1, minutes=24, seconds=19)
        second = timedelta(seconds=1)
        self.assertEqual(t / second, 5059.0)
        self.assertEqual(t // second, 5059)

        t = timedelta(minutes=2, seconds=30)
        minute = timedelta(minutes=1)
        self.assertEqual(t / minute, 2.5)
        self.assertEqual(t // minute, 2)

        zerotd = timedelta(0)
        self.assertRaises(ZeroDivisionError, truediv, t, zerotd)
        self.assertRaises(ZeroDivisionError, floordiv, t, zerotd)

        # self.assertRaises(TypeError, truediv, t, 2)
        # note: floor division of a timedelta by an integer *is*
        # currently permitted.
项目:Alfred    作者:jkachhadia    | 项目源码 | 文件源码
def test_modulus_basic(self):
        dt = np.typecodes['AllInteger'] + np.typecodes['Float']
        for dt1, dt2 in itertools.product(dt, dt):
            for sg1, sg2 in itertools.product((+1, -1), (+1, -1)):
                if sg1 == -1 and dt1 in np.typecodes['UnsignedInteger']:
                    continue
                if sg2 == -1 and dt2 in np.typecodes['UnsignedInteger']:
                    continue
                fmt = 'dt1: %s, dt2: %s, sg1: %s, sg2: %s'
                msg = fmt % (dt1, dt2, sg1, sg2)
                a = np.array(sg1*71, dtype=dt1)[()]
                b = np.array(sg2*19, dtype=dt2)[()]
                div = self.floordiv(a, b)
                rem = self.mod(a, b)
                assert_equal(div*b + rem, a, err_msg=msg)
                if sg2 == -1:
                    assert_(b < rem <= 0, msg)
                else:
                    assert_(b > rem >= 0, msg)
项目:Alfred    作者:jkachhadia    | 项目源码 | 文件源码
def test_float_modulus_roundoff(self):
        # gh-6127
        dt = np.typecodes['Float']
        for dt1, dt2 in itertools.product(dt, dt):
            for sg1, sg2 in itertools.product((+1, -1), (+1, -1)):
                fmt = 'dt1: %s, dt2: %s, sg1: %s, sg2: %s'
                msg = fmt % (dt1, dt2, sg1, sg2)
                a = np.array(sg1*78*6e-8, dtype=dt1)[()]
                b = np.array(sg2*6e-8, dtype=dt2)[()]
                div = self.floordiv(a, b)
                rem = self.mod(a, b)
                # Equal assertion should hold when fmod is used
                assert_equal(div*b + rem, a, err_msg=msg)
                if sg2 == -1:
                    assert_(b < rem <= 0, msg)
                else:
                    assert_(b > rem >= 0, msg)
项目:myhdlpeek    作者:xesscorp    | 项目源码 | 文件源码
def __floordiv__(self, trc):
        return self.apply_op2(trc, operator.floordiv)
项目:Projects    作者:it2school    | 项目源码 | 文件源码
def test_div (self):
        c1 = pygame.Color (0x80808080)
        self.assertEquals (c1.r, 128)
        self.assertEquals (c1.g, 128)
        self.assertEquals (c1.b, 128)
        self.assertEquals (c1.a, 128)

        c2 = pygame.Color (2, 4, 8, 16)
        self.assertEquals (c2.r, 2)
        self.assertEquals (c2.g, 4)
        self.assertEquals (c2.b, 8)
        self.assertEquals (c2.a, 16)

        c3 = c1 // c2
        self.assertEquals (c3.r, 64)
        self.assertEquals (c3.g, 32)
        self.assertEquals (c3.b, 16)
        self.assertEquals (c3.a, 8)

        c3 = c3 // c2
        self.assertEquals (c3.r, 32)
        self.assertEquals (c3.g, 8)
        self.assertEquals (c3.b, 2)
        self.assertEquals (c3.a, 0)

        # Issue #286: Is type checking done for Python 3.x?
        self.assertRaises (TypeError, operator.floordiv, c1, None)
        self.assertRaises (TypeError, operator.floordiv, None, c1)

        # Division by zero check
        dividend = pygame.Color (255, 255, 255, 255)
        for i in range (4):
            divisor = pygame.Color (64, 64, 64, 64)
            divisor[i] = 0
            quotient = pygame.Color (3, 3, 3, 3)
            quotient[i] = 0
            self.assertEqual (dividend // divisor, quotient)
项目:deb-python-pint    作者:openstack    | 项目源码 | 文件源码
def test_issue52(self):
        u1 = UnitRegistry()
        u2 = UnitRegistry()
        q1 = 1*u1.meter
        q2 = 1*u2.meter
        import operator as op
        for fun in (op.add, op.iadd,
                    op.sub, op.isub,
                    op.mul, op.imul,
                    op.floordiv, op.ifloordiv,
                    op.truediv, op.itruediv):
            self.assertRaises(ValueError, fun, q1, q2)
项目:deb-python-pint    作者:openstack    | 项目源码 | 文件源码
def _test_quantity_floordiv(self, unit, func):
        a = self.Q_('10*meter')
        b = self.Q_('3*second')
        self.assertRaises(DimensionalityError, op.floordiv, a, b)
        self.assertRaises(DimensionalityError, op.floordiv, 3, b)
        self.assertRaises(DimensionalityError, op.floordiv, a, 3)
        self.assertRaises(DimensionalityError, op.ifloordiv, a, b)
        self.assertRaises(DimensionalityError, op.ifloordiv, 3, b)
        self.assertRaises(DimensionalityError, op.ifloordiv, a, 3)
        func(op.floordiv, unit * 10.0, '4.2*meter/meter', 2, unit)
        func(op.floordiv, '10*meter', '4.2*inch', 93, unit)
项目:radar    作者:amoose136    | 项目源码 | 文件源码
def test_float_modulus_exact(self):
        # test that float results are exact for small integers. This also
        # holds for the same integers scaled by powers of two.
        nlst = list(range(-127, 0))
        plst = list(range(1, 128))
        dividend = nlst + [0] + plst
        divisor = nlst + plst
        arg = list(itertools.product(dividend, divisor))
        tgt = list(divmod(*t) for t in arg)

        a, b = np.array(arg, dtype=int).T
        # convert exact integer results from Python to float so that
        # signed zero can be used, it is checked.
        tgtdiv, tgtrem = np.array(tgt, dtype=float).T
        tgtdiv = np.where((tgtdiv == 0.0) & ((b < 0) ^ (a < 0)), -0.0, tgtdiv)
        tgtrem = np.where((tgtrem == 0.0) & (b < 0), -0.0, tgtrem)

        for dt in np.typecodes['Float']:
            msg = 'dtype: %s' % (dt,)
            fa = a.astype(dt)
            fb = b.astype(dt)
            # use list comprehension so a_ and b_ are scalars
            div = [self.floordiv(a_, b_) for  a_, b_ in zip(fa, fb)]
            rem = [self.mod(a_, b_) for a_, b_ in zip(fa, fb)]
            assert_equal(div, tgtdiv, err_msg=msg)
            assert_equal(rem, tgtrem, err_msg=msg)
项目:radar    作者:amoose136    | 项目源码 | 文件源码
def check_floordiv(Poly):
    c1 = list(random((4,)) + .5)
    c2 = list(random((3,)) + .5)
    c3 = list(random((2,)) + .5)
    p1 = Poly(c1)
    p2 = Poly(c2)
    p3 = Poly(c3)
    p4 = p1 * p2 + p3
    c4 = list(p4.coef)
    assert_poly_almost_equal(p4 // p2, p1)
    assert_poly_almost_equal(p4 // c2, p1)
    assert_poly_almost_equal(c4 // p2, p1)
    assert_poly_almost_equal(p4 // tuple(c2), p1)
    assert_poly_almost_equal(tuple(c4) // p2, p1)
    assert_poly_almost_equal(p4 // np.array(c2), p1)
    assert_poly_almost_equal(np.array(c4) // p2, p1)
    assert_poly_almost_equal(2 // p2, Poly([0]))
    assert_poly_almost_equal(p2 // 2, 0.5*p2)
    assert_raises(
        TypeError, op.floordiv, p1, Poly([0], domain=Poly.domain + 1))
    assert_raises(
        TypeError, op.floordiv, p1, Poly([0], window=Poly.window + 1))
    if Poly is Polynomial:
        assert_raises(TypeError, op.floordiv, p1, Chebyshev([0]))
    else:
        assert_raises(TypeError, op.floordiv, p1, Polynomial([0]))
项目:cupy    作者:cupy    | 项目源码 | 文件源码
def test_floordiv_scalar(self):
        with testing.NumpyError(divide='ignore'):
            self.check_array_scalar_op(operator.floordiv, no_complex=True)
项目:cupy    作者:cupy    | 项目源码 | 文件源码
def test_rfloordiv_scalar(self):
        with testing.NumpyError(divide='ignore'):
            self.check_array_scalar_op(operator.floordiv, swap=True,
                                       no_complex=True)
项目:cupy    作者:cupy    | 项目源码 | 文件源码
def test_floordiv_array(self):
        with testing.NumpyError(divide='ignore'):
            self.check_array_array_op(operator.floordiv, no_complex=True)
项目:cupy    作者:cupy    | 项目源码 | 文件源码
def test_broadcasted_floordiv(self):
        with testing.NumpyError(divide='ignore'):
            self.check_array_broadcasted_op(operator.floordiv, no_complex=True)
项目:cupy    作者:cupy    | 项目源码 | 文件源码
def test_doubly_broadcasted_floordiv(self):
        with testing.NumpyError(divide='ignore'):
            self.check_array_doubly_broadcasted_op(operator.floordiv,
                                                   no_complex=True)
项目:zippy    作者:securesystemslab    | 项目源码 | 文件源码
def test_floordiv(self):
        self.assertRaises(TypeError, operator.floordiv, 5)
        self.assertRaises(TypeError, operator.floordiv, None, None)
        self.assertTrue(operator.floordiv(5, 2) == 2)
项目:zippy    作者:securesystemslab    | 项目源码 | 文件源码
def test_complex(self):
        self.assertFalse(issubclass(complex, Real))
        self.assertTrue(issubclass(complex, Complex))

        c1, c2 = complex(3, 2), complex(4,1)
        # XXX: This is not ideal, but see the comment in math_trunc().
        self.assertRaises(TypeError, math.trunc, c1)
        self.assertRaises(TypeError, operator.mod, c1, c2)
        self.assertRaises(TypeError, divmod, c1, c2)
        self.assertRaises(TypeError, operator.floordiv, c1, c2)
        self.assertRaises(TypeError, float, c1)
        self.assertRaises(TypeError, int, c1)
项目:Vector-Tiles-Reader-QGIS-Plugin    作者:geometalab    | 项目源码 | 文件源码
def __floordiv__(self, y):
    return NonStandardInteger(operator.floordiv(self.val, y))
项目:Vector-Tiles-Reader-QGIS-Plugin    作者:geometalab    | 项目源码 | 文件源码
def __rfloordiv__(self, y):
    return NonStandardInteger(operator.floordiv(y, self.val))
项目:krpcScripts    作者:jwvanderbeck    | 项目源码 | 文件源码
def test_float_modulus_exact(self):
        # test that float results are exact for small integers. This also
        # holds for the same integers scaled by powers of two.
        nlst = list(range(-127, 0))
        plst = list(range(1, 128))
        dividend = nlst + [0] + plst
        divisor = nlst + plst
        arg = list(itertools.product(dividend, divisor))
        tgt = list(divmod(*t) for t in arg)

        a, b = np.array(arg, dtype=int).T
        # convert exact integer results from Python to float so that
        # signed zero can be used, it is checked.
        tgtdiv, tgtrem = np.array(tgt, dtype=float).T
        tgtdiv = np.where((tgtdiv == 0.0) & ((b < 0) ^ (a < 0)), -0.0, tgtdiv)
        tgtrem = np.where((tgtrem == 0.0) & (b < 0), -0.0, tgtrem)

        for dt in np.typecodes['Float']:
            msg = 'dtype: %s' % (dt,)
            fa = a.astype(dt)
            fb = b.astype(dt)
            # use list comprehension so a_ and b_ are scalars
            div = [self.floordiv(a_, b_) for  a_, b_ in zip(fa, fb)]
            rem = [self.mod(a_, b_) for a_, b_ in zip(fa, fb)]
            assert_equal(div, tgtdiv, err_msg=msg)
            assert_equal(rem, tgtrem, err_msg=msg)
项目:krpcScripts    作者:jwvanderbeck    | 项目源码 | 文件源码
def check_floordiv(Poly):
    c1 = list(random((4,)) + .5)
    c2 = list(random((3,)) + .5)
    c3 = list(random((2,)) + .5)
    p1 = Poly(c1)
    p2 = Poly(c2)
    p3 = Poly(c3)
    p4 = p1 * p2 + p3
    c4 = list(p4.coef)
    assert_poly_almost_equal(p4 // p2, p1)
    assert_poly_almost_equal(p4 // c2, p1)
    assert_poly_almost_equal(c4 // p2, p1)
    assert_poly_almost_equal(p4 // tuple(c2), p1)
    assert_poly_almost_equal(tuple(c4) // p2, p1)
    assert_poly_almost_equal(p4 // np.array(c2), p1)
    assert_poly_almost_equal(np.array(c4) // p2, p1)
    assert_poly_almost_equal(2 // p2, Poly([0]))
    assert_poly_almost_equal(p2 // 2, 0.5*p2)
    assert_raises(
        TypeError, op.floordiv, p1, Poly([0], domain=Poly.domain + 1))
    assert_raises(
        TypeError, op.floordiv, p1, Poly([0], window=Poly.window + 1))
    if Poly is Polynomial:
        assert_raises(TypeError, op.floordiv, p1, Chebyshev([0]))
    else:
        assert_raises(TypeError, op.floordiv, p1, Polynomial([0]))
项目:dxf2gcode    作者:cnc-club    | 项目源码 | 文件源码
def __floordiv__(self, other):
        assert type(other) in scalar_types
        return Vector2(operator.floordiv(self.x, other),
                       operator.floordiv(self.y, other))
项目:dxf2gcode    作者:cnc-club    | 项目源码 | 文件源码
def __rfloordiv__(self, other):
        assert type(other) in scalar_types
        return Vector2(operator.floordiv(other, self.x),
                       operator.floordiv(other, self.y))
项目:dxf2gcode    作者:cnc-club    | 项目源码 | 文件源码
def __floordiv__(self, other):
        assert type(other) in scalar_types
        return Vector3(operator.floordiv(self.x, other),
                       operator.floordiv(self.y, other),
                       operator.floordiv(self.z, other))
项目:dxf2gcode    作者:cnc-club    | 项目源码 | 文件源码
def __rfloordiv__(self, other):
        assert type(other) in scalar_types
        return Vector3(operator.floordiv(other, self.x),
                       operator.floordiv(other, self.y),
                       operator.floordiv(other, self.z))
项目:gtable    作者:guillemborrell    | 项目源码 | 文件源码
def apply_floordiv(left: Column, right):
    if type(right) == Column:
        result, index = apply_fast_floordiv(left.values, right.values,
                                            left.index, right.index)
        return Column(result, index)

    else:
        return Column(operator.floordiv(left.values, right), left.index)
项目:oil    作者:oilshell    | 项目源码 | 文件源码
def test_div(self):
        self.assertRaises(TypeError, operator.div, 5)
        self.assertRaises(TypeError, operator.div, None, None)
        self.assertTrue(operator.floordiv(5, 2) == 2)
项目:oil    作者:oilshell    | 项目源码 | 文件源码
def test_floordiv(self):
        self.assertRaises(TypeError, operator.floordiv, 5)
        self.assertRaises(TypeError, operator.floordiv, None, None)
        self.assertTrue(operator.floordiv(5, 2) == 2)
项目:python2-tracer    作者:extremecoders-re    | 项目源码 | 文件源码
def test_div(self):
        self.assertRaises(TypeError, operator.div, 5)
        self.assertRaises(TypeError, operator.div, None, None)
        self.assertTrue(operator.floordiv(5, 2) == 2)
项目:python2-tracer    作者:extremecoders-re    | 项目源码 | 文件源码
def test_floordiv(self):
        self.assertRaises(TypeError, operator.floordiv, 5)
        self.assertRaises(TypeError, operator.floordiv, None, None)
        self.assertTrue(operator.floordiv(5, 2) == 2)
项目:chainer-deconv    作者:germanRos    | 项目源码 | 文件源码
def test_rfloordiv_scalar(self):
        with testing.NumpyError(divide='ignore'):
            self.check_array_scalar_op(operator.floordiv, swap=True)
项目:chainer-deconv    作者:germanRos    | 项目源码 | 文件源码
def test_floordiv_array(self):
        with testing.NumpyError(divide='ignore'):
            self.check_array_array_op(operator.floordiv)