Python warnings 模块,html() 实例源码

我们从Python开源项目中,提取了以下50个代码示例,用于说明如何使用warnings.html()

项目:SceneDensity    作者:ImOmid    | 项目源码 | 文件源码
def group(s, n):
    # See http://www.python.org/doc/2.6/library/functions.html#zip
    return list(zip(*[iter(s)]*n))
项目:SceneDensity    作者:ImOmid    | 项目源码 | 文件源码
def interleave_planes(ipixels, apixels, ipsize, apsize):
    """
    Interleave (colour) planes, e.g. RGB + A = RGBA.

    Return an array of pixels consisting of the `ipsize` elements of
    data from each pixel in `ipixels` followed by the `apsize` elements
    of data from each pixel in `apixels`.  Conventionally `ipixels`
    and `apixels` are byte arrays so the sizes are bytes, but it
    actually works with any arrays of the same type.  The returned
    array is the same type as the input arrays which should be the
    same type as each other.
    """

    itotal = len(ipixels)
    atotal = len(apixels)
    newtotal = itotal + atotal
    newpsize = ipsize + apsize
    # Set up the output buffer
    # See http://www.python.org/doc/2.4.4/lib/module-array.html#l2h-1356
    out = array(ipixels.typecode)
    # It's annoying that there is no cheap way to set the array size :-(
    out.extend(ipixels)
    out.extend(apixels)
    # Interleave in the pixel data
    for i in range(ipsize):
        out[i:newtotal:newpsize] = ipixels[i:itotal:ipsize]
    for i in range(apsize):
        out[i+ipsize:newtotal:newpsize] = apixels[i:atotal:apsize]
    return out
项目:Projects    作者:it2school    | 项目源码 | 文件源码
def group(s, n):
    # See
    # http://www.python.org/doc/2.6/library/functions.html#zip
    return zip(*[iter(s)]*n)
项目:Projects    作者:it2school    | 项目源码 | 文件源码
def interleave_planes(ipixels, apixels, ipsize, apsize):
    """
    Interleave (colour) planes, e.g. RGB + A = RGBA.

    Return an array of pixels consisting of the `ipsize` elements of data
    from each pixel in `ipixels` followed by the `apsize` elements of data
    from each pixel in `apixels`.  Conventionally `ipixels` and
    `apixels` are byte arrays so the sizes are bytes, but it actually
    works with any arrays of the same type.  The returned array is the
    same type as the input arrays which should be the same type as each other.
    """

    itotal = len(ipixels)
    atotal = len(apixels)
    newtotal = itotal + atotal
    newpsize = ipsize + apsize
    # Set up the output buffer
    # See http://www.python.org/doc/2.4.4/lib/module-array.html#l2h-1356
    out = array(ipixels.typecode)
    # It's annoying that there is no cheap way to set the array size :-(
    out.extend(ipixels)
    out.extend(apixels)
    # Interleave in the pixel data
    for i in range(ipsize):
        out[i:newtotal:newpsize] = ipixels[i:itotal:ipsize]
    for i in range(apsize):
        out[i+ipsize:newtotal:newpsize] = apixels[i:atotal:apsize]
    return out
项目:Projects    作者:it2school    | 项目源码 | 文件源码
def mycallersname():
    """Returns the name of the caller of the caller of this function
    (hence the name of the caller of the function in which
    "mycallersname()" textually appears).  Returns None if this cannot
    be determined."""

    # http://docs.python.org/library/inspect.html#the-interpreter-stack
    import inspect

    frame = inspect.currentframe()
    if not frame:
        return None
    frame_,filename_,lineno_,funname,linelist_,listi_ = (
      inspect.getouterframes(frame)[2])
    return funname
项目:Projects    作者:it2school    | 项目源码 | 文件源码
def _enhex(s):
    """Convert from binary string (bytes) to hex string (str)."""

    import binascii

    return bytestostr(binascii.hexlify(s))

# Copies of PngSuite test files taken
# from http://www.schaik.com/pngsuite/pngsuite_bas_png.html
# on 2009-02-19 by drj and converted to hex.
# Some of these are not actually in PngSuite (but maybe they should
# be?), they use the same naming scheme, but start with a capital
# letter.
项目:sublime-text-3-packages    作者:nickjj    | 项目源码 | 文件源码
def group(s, n):
    # See
    # http://www.python.org/doc/2.6/library/functions.html#zip
    return list(zip(*[iter(s)]*n))
项目:sublime-text-3-packages    作者:nickjj    | 项目源码 | 文件源码
def interleave_planes(ipixels, apixels, ipsize, apsize):
    """
    Interleave (colour) planes, e.g. RGB + A = RGBA.

    Return an array of pixels consisting of the `ipsize` elements of data
    from each pixel in `ipixels` followed by the `apsize` elements of data
    from each pixel in `apixels`.  Conventionally `ipixels` and
    `apixels` are byte arrays so the sizes are bytes, but it actually
    works with any arrays of the same type.  The returned array is the
    same type as the input arrays which should be the same type as each other.
    """

    itotal = len(ipixels)
    atotal = len(apixels)
    newtotal = itotal + atotal
    newpsize = ipsize + apsize
    # Set up the output buffer
    # See http://www.python.org/doc/2.4.4/lib/module-array.html#l2h-1356
    out = array(ipixels.typecode)
    # It's annoying that there is no cheap way to set the array size :-(
    out.extend(ipixels)
    out.extend(apixels)
    # Interleave in the pixel data
    for i in range(ipsize):
        out[i:newtotal:newpsize] = ipixels[i:itotal:ipsize]
    for i in range(apsize):
        out[i+ipsize:newtotal:newpsize] = apixels[i:atotal:apsize]
    return out
项目:sublime-text-3-packages    作者:nickjj    | 项目源码 | 文件源码
def mycallersname():
    """Returns the name of the caller of the caller of this function
    (hence the name of the caller of the function in which
    "mycallersname()" textually appears).  Returns None if this cannot
    be determined."""

    # http://docs.python.org/library/inspect.html#the-interpreter-stack
    import inspect

    frame = inspect.currentframe()
    if not frame:
        return None
    frame_,filename_,lineno_,funname,linelist_,listi_ = (
      inspect.getouterframes(frame)[2])
    return funname
项目:sublime-text-3-packages    作者:nickjj    | 项目源码 | 文件源码
def _enhex(s):
    """Convert from binary string (bytes) to hex string (str)."""

    import binascii

    return bytestostr(binascii.hexlify(s))

# Copies of PngSuite test files taken
# from http://www.schaik.com/pngsuite/pngsuite_bas_png.html
# on 2009-02-19 by drj and converted to hex.
# Some of these are not actually in PngSuite (but maybe they should
# be?), they use the same naming scheme, but start with a capital
# letter.
项目:Cryptokey_Generator    作者:8BitCookie    | 项目源码 | 文件源码
def group(s, n):
    # See http://www.python.org/doc/2.6/library/functions.html#zip
    return list(zip(*[iter(s)]*n))
项目:Cryptokey_Generator    作者:8BitCookie    | 项目源码 | 文件源码
def interleave_planes(ipixels, apixels, ipsize, apsize):
    """
    Interleave (colour) planes, e.g. RGB + A = RGBA.

    Return an array of pixels consisting of the `ipsize` elements of
    data from each pixel in `ipixels` followed by the `apsize` elements
    of data from each pixel in `apixels`.  Conventionally `ipixels`
    and `apixels` are byte arrays so the sizes are bytes, but it
    actually works with any arrays of the same type.  The returned
    array is the same type as the input arrays which should be the
    same type as each other.
    """

    itotal = len(ipixels)
    atotal = len(apixels)
    newtotal = itotal + atotal
    newpsize = ipsize + apsize
    # Set up the output buffer
    # See http://www.python.org/doc/2.4.4/lib/module-array.html#l2h-1356
    out = array(ipixels.typecode)
    # It's annoying that there is no cheap way to set the array size :-(
    out.extend(ipixels)
    out.extend(apixels)
    # Interleave in the pixel data
    for i in range(ipsize):
        out[i:newtotal:newpsize] = ipixels[i:itotal:ipsize]
    for i in range(apsize):
        out[i+ipsize:newtotal:newpsize] = apixels[i:atotal:apsize]
    return out
项目:hostapd-mana    作者:adde88    | 项目源码 | 文件源码
def recwarn(request):
    """Return a WarningsRecorder instance that provides these methods:

    * ``pop(category=None)``: return last warning matching the category.
    * ``clear()``: clear list of warnings

    See http://docs.python.org/library/warnings.html for information
    on warning categories.
    """
    wrec = WarningsRecorder()
    with wrec:
        warnings.simplefilter('default')
        yield wrec
项目:macos-st-packages    作者:zce    | 项目源码 | 文件源码
def group(s, n):
    # See
    # http://www.python.org/doc/2.6/library/functions.html#zip
    return list(zip(*[iter(s)]*n))
项目:macos-st-packages    作者:zce    | 项目源码 | 文件源码
def interleave_planes(ipixels, apixels, ipsize, apsize):
    """
    Interleave (colour) planes, e.g. RGB + A = RGBA.

    Return an array of pixels consisting of the `ipsize` elements of data
    from each pixel in `ipixels` followed by the `apsize` elements of data
    from each pixel in `apixels`.  Conventionally `ipixels` and
    `apixels` are byte arrays so the sizes are bytes, but it actually
    works with any arrays of the same type.  The returned array is the
    same type as the input arrays which should be the same type as each other.
    """

    itotal = len(ipixels)
    atotal = len(apixels)
    newtotal = itotal + atotal
    newpsize = ipsize + apsize
    # Set up the output buffer
    # See http://www.python.org/doc/2.4.4/lib/module-array.html#l2h-1356
    out = array(ipixels.typecode)
    # It's annoying that there is no cheap way to set the array size :-(
    out.extend(ipixels)
    out.extend(apixels)
    # Interleave in the pixel data
    for i in range(ipsize):
        out[i:newtotal:newpsize] = ipixels[i:itotal:ipsize]
    for i in range(apsize):
        out[i+ipsize:newtotal:newpsize] = apixels[i:atotal:apsize]
    return out
项目:macos-st-packages    作者:zce    | 项目源码 | 文件源码
def mycallersname():
    """Returns the name of the caller of the caller of this function
    (hence the name of the caller of the function in which
    "mycallersname()" textually appears).  Returns None if this cannot
    be determined."""

    # http://docs.python.org/library/inspect.html#the-interpreter-stack
    import inspect

    frame = inspect.currentframe()
    if not frame:
        return None
    frame_,filename_,lineno_,funname,linelist_,listi_ = (
      inspect.getouterframes(frame)[2])
    return funname
项目:macos-st-packages    作者:zce    | 项目源码 | 文件源码
def _enhex(s):
    """Convert from binary string (bytes) to hex string (str)."""

    import binascii

    return bytestostr(binascii.hexlify(s))

# Copies of PngSuite test files taken
# from http://www.schaik.com/pngsuite/pngsuite_bas_png.html
# on 2009-02-19 by drj and converted to hex.
# Some of these are not actually in PngSuite (but maybe they should
# be?), they use the same naming scheme, but start with a capital
# letter.
项目:codingTheMatrix    作者:RestrictedZone    | 项目源码 | 文件源码
def group(s, n):
    # See
    # http://www.python.org/doc/2.6/library/functions.html#zip
    return list(zip(*[iter(s)]*n))
项目:codingTheMatrix    作者:RestrictedZone    | 项目源码 | 文件源码
def interleave_planes(ipixels, apixels, ipsize, apsize):
    """
    Interleave (colour) planes, e.g. RGB + A = RGBA.

    Return an array of pixels consisting of the `ipsize` elements of data
    from each pixel in `ipixels` followed by the `apsize` elements of data
    from each pixel in `apixels`.  Conventionally `ipixels` and
    `apixels` are byte arrays so the sizes are bytes, but it actually
    works with any arrays of the same type.  The returned array is the
    same type as the input arrays which should be the same type as each other.
    """

    itotal = len(ipixels)
    atotal = len(apixels)
    newtotal = itotal + atotal
    newpsize = ipsize + apsize
    # Set up the output buffer
    # See http://www.python.org/doc/2.4.4/lib/module-array.html#l2h-1356
    out = array(ipixels.typecode)
    # It's annoying that there is no cheap way to set the array size :-(
    out.extend(ipixels)
    out.extend(apixels)
    # Interleave in the pixel data
    for i in range(ipsize):
        out[i:newtotal:newpsize] = ipixels[i:itotal:ipsize]
    for i in range(apsize):
        out[i+ipsize:newtotal:newpsize] = apixels[i:atotal:apsize]
    return out
项目:codingTheMatrix    作者:RestrictedZone    | 项目源码 | 文件源码
def mycallersname():
    """Returns the name of the caller of the caller of this function
    (hence the name of the caller of the function in which
    "mycallersname()" textually appears).  Returns None if this cannot
    be determined."""

    # http://docs.python.org/library/inspect.html#the-interpreter-stack
    import inspect

    frame = inspect.currentframe()
    if not frame:
        return None
    frame_,filename_,lineno_,funname,linelist_,listi_ = (
      inspect.getouterframes(frame)[2])
    return funname
项目:codingTheMatrix    作者:RestrictedZone    | 项目源码 | 文件源码
def _enhex(s):
    """Convert from binary string (bytes) to hex string (str)."""

    import binascii

    return bytestostr(binascii.hexlify(s))

# Copies of PngSuite test files taken
# from http://www.schaik.com/pngsuite/pngsuite_bas_png.html
# on 2009-02-19 by drj and converted to hex.
# Some of these are not actually in PngSuite (but maybe they should
# be?), they use the same naming scheme, but start with a capital
# letter.
项目:codingTheMatrix    作者:RestrictedZone    | 项目源码 | 文件源码
def interleave_planes(ipixels, apixels, ipsize, apsize):
    """
    Interleave (colour) planes, e.g. RGB + A = RGBA.

    Return an array of pixels consisting of the `ipsize` elements of data
    from each pixel in `ipixels` followed by the `apsize` elements of data
    from each pixel in `apixels`.  Conventionally `ipixels` and
    `apixels` are byte arrays so the sizes are bytes, but it actually
    works with any arrays of the same type.  The returned array is the
    same type as the input arrays which should be the same type as each other.
    """

    itotal = len(ipixels)
    atotal = len(apixels)
    newtotal = itotal + atotal
    newpsize = ipsize + apsize
    # Set up the output buffer
    # See http://www.python.org/doc/2.4.4/lib/module-array.html#l2h-1356
    out = array(ipixels.typecode)
    # It's annoying that there is no cheap way to set the array size :-(
    out.extend(ipixels)
    out.extend(apixels)
    # Interleave in the pixel data
    for i in range(ipsize):
        out[i:newtotal:newpsize] = ipixels[i:itotal:ipsize]
    for i in range(apsize):
        out[i+ipsize:newtotal:newpsize] = apixels[i:atotal:apsize]
    return out
项目:codingTheMatrix    作者:RestrictedZone    | 项目源码 | 文件源码
def mycallersname():
    """Returns the name of the caller of the caller of this function
    (hence the name of the caller of the function in which
    "mycallersname()" textually appears).  Returns None if this cannot
    be determined."""

    # http://docs.python.org/library/inspect.html#the-interpreter-stack
    import inspect

    frame = inspect.currentframe()
    if not frame:
        return None
    frame_,filename_,lineno_,funname,linelist_,listi_ = (
      inspect.getouterframes(frame)[2])
    return funname
项目:codingTheMatrix    作者:RestrictedZone    | 项目源码 | 文件源码
def _enhex(s):
    """Convert from binary string (bytes) to hex string (str)."""

    import binascii

    return bytestostr(binascii.hexlify(s))

# Copies of PngSuite test files taken
# from http://www.schaik.com/pngsuite/pngsuite_bas_png.html
# on 2009-02-19 by drj and converted to hex.
# Some of these are not actually in PngSuite (but maybe they should
# be?), they use the same naming scheme, but start with a capital
# letter.
项目:codingTheMatrix    作者:RestrictedZone    | 项目源码 | 文件源码
def group(s, n):
    # See
    # http://www.python.org/doc/2.6/library/functions.html#zip
    return list(zip(*[iter(s)]*n))
项目:codingTheMatrix    作者:RestrictedZone    | 项目源码 | 文件源码
def mycallersname():
    """Returns the name of the caller of the caller of this function
    (hence the name of the caller of the function in which
    "mycallersname()" textually appears).  Returns None if this cannot
    be determined."""

    # http://docs.python.org/library/inspect.html#the-interpreter-stack
    import inspect

    frame = inspect.currentframe()
    if not frame:
        return None
    frame_,filename_,lineno_,funname,linelist_,listi_ = (
      inspect.getouterframes(frame)[2])
    return funname
项目:codingTheMatrix    作者:RestrictedZone    | 项目源码 | 文件源码
def _enhex(s):
    """Convert from binary string (bytes) to hex string (str)."""

    import binascii

    return bytestostr(binascii.hexlify(s))

# Copies of PngSuite test files taken
# from http://www.schaik.com/pngsuite/pngsuite_bas_png.html
# on 2009-02-19 by drj and converted to hex.
# Some of these are not actually in PngSuite (but maybe they should
# be?), they use the same naming scheme, but start with a capital
# letter.
项目:codingTheMatrix    作者:RestrictedZone    | 项目源码 | 文件源码
def group(s, n):
    # See
    # http://www.python.org/doc/2.6/library/functions.html#zip
    return list(zip(*[iter(s)]*n))
项目:codingTheMatrix    作者:RestrictedZone    | 项目源码 | 文件源码
def interleave_planes(ipixels, apixels, ipsize, apsize):
    """
    Interleave (colour) planes, e.g. RGB + A = RGBA.

    Return an array of pixels consisting of the `ipsize` elements of data
    from each pixel in `ipixels` followed by the `apsize` elements of data
    from each pixel in `apixels`.  Conventionally `ipixels` and
    `apixels` are byte arrays so the sizes are bytes, but it actually
    works with any arrays of the same type.  The returned array is the
    same type as the input arrays which should be the same type as each other.
    """

    itotal = len(ipixels)
    atotal = len(apixels)
    newtotal = itotal + atotal
    newpsize = ipsize + apsize
    # Set up the output buffer
    # See http://www.python.org/doc/2.4.4/lib/module-array.html#l2h-1356
    out = array(ipixels.typecode)
    # It's annoying that there is no cheap way to set the array size :-(
    out.extend(ipixels)
    out.extend(apixels)
    # Interleave in the pixel data
    for i in range(ipsize):
        out[i:newtotal:newpsize] = ipixels[i:itotal:ipsize]
    for i in range(apsize):
        out[i+ipsize:newtotal:newpsize] = apixels[i:atotal:apsize]
    return out
项目:codingTheMatrix    作者:RestrictedZone    | 项目源码 | 文件源码
def _enhex(s):
    """Convert from binary string (bytes) to hex string (str)."""

    import binascii

    return bytestostr(binascii.hexlify(s))

# Copies of PngSuite test files taken
# from http://www.schaik.com/pngsuite/pngsuite_bas_png.html
# on 2009-02-19 by drj and converted to hex.
# Some of these are not actually in PngSuite (but maybe they should
# be?), they use the same naming scheme, but start with a capital
# letter.
项目:codingTheMatrix    作者:RestrictedZone    | 项目源码 | 文件源码
def group(s, n):
    # See
    # http://www.python.org/doc/2.6/library/functions.html#zip
    return list(zip(*[iter(s)]*n))
项目:codingTheMatrix    作者:RestrictedZone    | 项目源码 | 文件源码
def interleave_planes(ipixels, apixels, ipsize, apsize):
    """
    Interleave (colour) planes, e.g. RGB + A = RGBA.

    Return an array of pixels consisting of the `ipsize` elements of data
    from each pixel in `ipixels` followed by the `apsize` elements of data
    from each pixel in `apixels`.  Conventionally `ipixels` and
    `apixels` are byte arrays so the sizes are bytes, but it actually
    works with any arrays of the same type.  The returned array is the
    same type as the input arrays which should be the same type as each other.
    """

    itotal = len(ipixels)
    atotal = len(apixels)
    newtotal = itotal + atotal
    newpsize = ipsize + apsize
    # Set up the output buffer
    # See http://www.python.org/doc/2.4.4/lib/module-array.html#l2h-1356
    out = array(ipixels.typecode)
    # It's annoying that there is no cheap way to set the array size :-(
    out.extend(ipixels)
    out.extend(apixels)
    # Interleave in the pixel data
    for i in range(ipsize):
        out[i:newtotal:newpsize] = ipixels[i:itotal:ipsize]
    for i in range(apsize):
        out[i+ipsize:newtotal:newpsize] = apixels[i:atotal:apsize]
    return out
项目:codingTheMatrix    作者:RestrictedZone    | 项目源码 | 文件源码
def mycallersname():
    """Returns the name of the caller of the caller of this function
    (hence the name of the caller of the function in which
    "mycallersname()" textually appears).  Returns None if this cannot
    be determined."""

    # http://docs.python.org/library/inspect.html#the-interpreter-stack
    import inspect

    frame = inspect.currentframe()
    if not frame:
        return None
    frame_,filename_,lineno_,funname,linelist_,listi_ = (
      inspect.getouterframes(frame)[2])
    return funname
项目:driveboardapp    作者:nortd    | 项目源码 | 文件源码
def group(s, n):
    # See http://www.python.org/doc/2.6/library/functions.html#zip
    return zip(*[iter(s)]*n)
项目:driveboardapp    作者:nortd    | 项目源码 | 文件源码
def interleave_planes(ipixels, apixels, ipsize, apsize):
    """
    Interleave (colour) planes, e.g. RGB + A = RGBA.

    Return an array of pixels consisting of the `ipsize` elements of
    data from each pixel in `ipixels` followed by the `apsize` elements
    of data from each pixel in `apixels`.  Conventionally `ipixels`
    and `apixels` are byte arrays so the sizes are bytes, but it
    actually works with any arrays of the same type.  The returned
    array is the same type as the input arrays which should be the
    same type as each other.
    """

    itotal = len(ipixels)
    atotal = len(apixels)
    newtotal = itotal + atotal
    newpsize = ipsize + apsize
    # Set up the output buffer
    # See http://www.python.org/doc/2.4.4/lib/module-array.html#l2h-1356
    out = array(ipixels.typecode)
    # It's annoying that there is no cheap way to set the array size :-(
    out.extend(ipixels)
    out.extend(apixels)
    # Interleave in the pixel data
    for i in range(ipsize):
        out[i:newtotal:newpsize] = ipixels[i:itotal:ipsize]
    for i in range(apsize):
        out[i+ipsize:newtotal:newpsize] = apixels[i:atotal:apsize]
    return out
项目:driveboardapp    作者:nortd    | 项目源码 | 文件源码
def isinteger(x):
    try:
        return int(x) == x
    except (TypeError, ValueError):
        return False


# === Legacy Version Support ===

# :pyver:old:  PyPNG works on Python versions 2.3 and 2.2, but not
# without some awkward problems.  Really PyPNG works on Python 2.4 (and
# above); it works on Pythons 2.3 and 2.2 by virtue of fixing up
# problems here.  It's a bit ugly (which is why it's hidden down here).
#
# Generally the strategy is one of pretending that we're running on
# Python 2.4 (or above), and patching up the library support on earlier
# versions so that it looks enough like Python 2.4.  When it comes to
# Python 2.2 there is one thing we cannot patch: extended slices
# http://www.python.org/doc/2.3/whatsnew/section-slices.html.
# Instead we simply declare that features that are implemented using
# extended slices will not work on Python 2.2.
#
# In order to work on Python 2.3 we fix up a recurring annoyance involving
# the array type.  In Python 2.3 an array cannot be initialised with an
# array, and it cannot be extended with a list (or other sequence).
# Both of those are repeated issues in the code.  Whilst I would not
# normally tolerate this sort of behaviour, here we "shim" a replacement
# for array into place (and hope no-one notices).  You never read this.
#
# In an amusing case of warty hacks on top of warty hacks... the array
# shimming we try and do only works on Python 2.3 and above (you can't
# subclass array.array in Python 2.2).  So to get it working on Python
# 2.2 we go for something much simpler and (probably) way slower.
项目:timer-workflow    作者:5fth    | 项目源码 | 文件源码
def group(s, n):
    # See http://www.python.org/doc/2.6/library/functions.html#zip
    return zip(*[iter(s)]*n)
项目:timer-workflow    作者:5fth    | 项目源码 | 文件源码
def interleave_planes(ipixels, apixels, ipsize, apsize):
    """
    Interleave (colour) planes, e.g. RGB + A = RGBA.

    Return an array of pixels consisting of the `ipsize` elements of
    data from each pixel in `ipixels` followed by the `apsize` elements
    of data from each pixel in `apixels`.  Conventionally `ipixels`
    and `apixels` are byte arrays so the sizes are bytes, but it
    actually works with any arrays of the same type.  The returned
    array is the same type as the input arrays which should be the
    same type as each other.
    """

    itotal = len(ipixels)
    atotal = len(apixels)
    newtotal = itotal + atotal
    newpsize = ipsize + apsize
    # Set up the output buffer
    # See http://www.python.org/doc/2.4.4/lib/module-array.html#l2h-1356
    out = array(ipixels.typecode)
    # It's annoying that there is no cheap way to set the array size :-(
    out.extend(ipixels)
    out.extend(apixels)
    # Interleave in the pixel data
    for i in range(ipsize):
        out[i:newtotal:newpsize] = ipixels[i:itotal:ipsize]
    for i in range(apsize):
        out[i+ipsize:newtotal:newpsize] = apixels[i:atotal:apsize]
    return out
项目:timer-workflow    作者:5fth    | 项目源码 | 文件源码
def isinteger(x):
    try:
        return int(x) == x
    except (TypeError, ValueError):
        return False


# === Legacy Version Support ===

# :pyver:old:  PyPNG works on Python versions 2.3 and 2.2, but not
# without some awkward problems.  Really PyPNG works on Python 2.4 (and
# above); it works on Pythons 2.3 and 2.2 by virtue of fixing up
# problems here.  It's a bit ugly (which is why it's hidden down here).
#
# Generally the strategy is one of pretending that we're running on
# Python 2.4 (or above), and patching up the library support on earlier
# versions so that it looks enough like Python 2.4.  When it comes to
# Python 2.2 there is one thing we cannot patch: extended slices
# http://www.python.org/doc/2.3/whatsnew/section-slices.html.
# Instead we simply declare that features that are implemented using
# extended slices will not work on Python 2.2.
#
# In order to work on Python 2.3 we fix up a recurring annoyance involving
# the array type.  In Python 2.3 an array cannot be initialised with an
# array, and it cannot be extended with a list (or other sequence).
# Both of those are repeated issues in the code.  Whilst I would not
# normally tolerate this sort of behaviour, here we "shim" a replacement
# for array into place (and hope no-one notices).  You never read this.
#
# In an amusing case of warty hacks on top of warty hacks... the array
# shimming we try and do only works on Python 2.3 and above (you can't
# subclass array.array in Python 2.2).  So to get it working on Python
# 2.2 we go for something much simpler and (probably) way slower.
项目:sslstrip-hsts-openwrt    作者:adde88    | 项目源码 | 文件源码
def recwarn(request):
    """Return a WarningsRecorder instance that provides these methods:

    * ``pop(category=None)``: return last warning matching the category.
    * ``clear()``: clear list of warnings

    See http://docs.python.org/library/warnings.html for information
    on warning categories.
    """
    wrec = WarningsRecorder()
    with wrec:
        warnings.simplefilter('default')
        yield wrec
项目:Electrify    作者:jyapayne    | 项目源码 | 文件源码
def group(s, n):
    # See http://www.python.org/doc/2.6/library/functions.html#zip
    return list(zip(*[iter(s)]*n))
项目:Electrify    作者:jyapayne    | 项目源码 | 文件源码
def interleave_planes(ipixels, apixels, ipsize, apsize):
    """
    Interleave (colour) planes, e.g. RGB + A = RGBA.

    Return an array of pixels consisting of the `ipsize` elements of
    data from each pixel in `ipixels` followed by the `apsize` elements
    of data from each pixel in `apixels`.  Conventionally `ipixels`
    and `apixels` are byte arrays so the sizes are bytes, but it
    actually works with any arrays of the same type.  The returned
    array is the same type as the input arrays which should be the
    same type as each other.
    """

    itotal = len(ipixels)
    atotal = len(apixels)
    newtotal = itotal + atotal
    newpsize = ipsize + apsize
    # Set up the output buffer
    # See http://www.python.org/doc/2.4.4/lib/module-array.html#l2h-1356
    out = array(ipixels.typecode)
    # It's annoying that there is no cheap way to set the array size :-(
    out.extend(ipixels)
    out.extend(apixels)
    # Interleave in the pixel data
    for i in range(ipsize):
        out[i:newtotal:newpsize] = ipixels[i:itotal:ipsize]
    for i in range(apsize):
        out[i+ipsize:newtotal:newpsize] = apixels[i:atotal:apsize]
    return out
项目:godot-python    作者:touilleMan    | 项目源码 | 文件源码
def recwarn(request):
    """Return a WarningsRecorder instance that provides these methods:

    * ``pop(category=None)``: return last warning matching the category.
    * ``clear()``: clear list of warnings

    See http://docs.python.org/library/warnings.html for information
    on warning categories.
    """
    wrec = WarningsRecorder()
    with wrec:
        warnings.simplefilter('default')
        yield wrec
项目:godot-python    作者:touilleMan    | 项目源码 | 文件源码
def recwarn(request):
    """Return a WarningsRecorder instance that provides these methods:

    * ``pop(category=None)``: return last warning matching the category.
    * ``clear()``: clear list of warnings

    See http://docs.python.org/library/warnings.html for information
    on warning categories.
    """
    wrec = WarningsRecorder()
    with wrec:
        warnings.simplefilter('default')
        yield wrec
项目:mlpaint    作者:mldbai    | 项目源码 | 文件源码
def group(s, n):
    # See http://www.python.org/doc/2.6/library/functions.html#zip
    return list(zip(*[iter(s)]*n))
项目:mlpaint    作者:mldbai    | 项目源码 | 文件源码
def interleave_planes(ipixels, apixels, ipsize, apsize):
    """
    Interleave (colour) planes, e.g. RGB + A = RGBA.

    Return an array of pixels consisting of the `ipsize` elements of
    data from each pixel in `ipixels` followed by the `apsize` elements
    of data from each pixel in `apixels`.  Conventionally `ipixels`
    and `apixels` are byte arrays so the sizes are bytes, but it
    actually works with any arrays of the same type.  The returned
    array is the same type as the input arrays which should be the
    same type as each other.
    """

    itotal = len(ipixels)
    atotal = len(apixels)
    newtotal = itotal + atotal
    newpsize = ipsize + apsize
    # Set up the output buffer
    # See http://www.python.org/doc/2.4.4/lib/module-array.html#l2h-1356
    out = array(ipixels.typecode)
    # It's annoying that there is no cheap way to set the array size :-(
    out.extend(ipixels)
    out.extend(apixels)
    # Interleave in the pixel data
    for i in range(ipsize):
        out[i:newtotal:newpsize] = ipixels[i:itotal:ipsize]
    for i in range(apsize):
        out[i+ipsize:newtotal:newpsize] = apixels[i:atotal:apsize]
    return out
项目:BeachedWhale    作者:southpaw5271    | 项目源码 | 文件源码
def group(s, n):
    # See http://www.python.org/doc/2.6/library/functions.html#zip
    return list(zip(*[iter(s)]*n))
项目:BeachedWhale    作者:southpaw5271    | 项目源码 | 文件源码
def interleave_planes(ipixels, apixels, ipsize, apsize):
    """
    Interleave (colour) planes, e.g. RGB + A = RGBA.

    Return an array of pixels consisting of the `ipsize` elements of
    data from each pixel in `ipixels` followed by the `apsize` elements
    of data from each pixel in `apixels`.  Conventionally `ipixels`
    and `apixels` are byte arrays so the sizes are bytes, but it
    actually works with any arrays of the same type.  The returned
    array is the same type as the input arrays which should be the
    same type as each other.
    """

    itotal = len(ipixels)
    atotal = len(apixels)
    newtotal = itotal + atotal
    newpsize = ipsize + apsize
    # Set up the output buffer
    # See http://www.python.org/doc/2.4.4/lib/module-array.html#l2h-1356
    out = array(ipixels.typecode)
    # It's annoying that there is no cheap way to set the array size :-(
    out.extend(ipixels)
    out.extend(apixels)
    # Interleave in the pixel data
    for i in range(ipsize):
        out[i:newtotal:newpsize] = ipixels[i:itotal:ipsize]
    for i in range(apsize):
        out[i+ipsize:newtotal:newpsize] = apixels[i:atotal:apsize]
    return out
项目:FightstickDisplay    作者:calexil    | 项目源码 | 文件源码
def group(s, n):
    # See http://www.python.org/doc/2.6/library/functions.html#zip
    return list(zip(*[iter(s)]*n))
项目:FightstickDisplay    作者:calexil    | 项目源码 | 文件源码
def interleave_planes(ipixels, apixels, ipsize, apsize):
    """
    Interleave (colour) planes, e.g. RGB + A = RGBA.

    Return an array of pixels consisting of the `ipsize` elements of
    data from each pixel in `ipixels` followed by the `apsize` elements
    of data from each pixel in `apixels`.  Conventionally `ipixels`
    and `apixels` are byte arrays so the sizes are bytes, but it
    actually works with any arrays of the same type.  The returned
    array is the same type as the input arrays which should be the
    same type as each other.
    """

    itotal = len(ipixels)
    atotal = len(apixels)
    newtotal = itotal + atotal
    newpsize = ipsize + apsize
    # Set up the output buffer
    # See http://www.python.org/doc/2.4.4/lib/module-array.html#l2h-1356
    out = array(ipixels.typecode)
    # It's annoying that there is no cheap way to set the array size :-(
    out.extend(ipixels)
    out.extend(apixels)
    # Interleave in the pixel data
    for i in range(ipsize):
        out[i:newtotal:newpsize] = ipixels[i:itotal:ipsize]
    for i in range(apsize):
        out[i+ipsize:newtotal:newpsize] = apixels[i:atotal:apsize]
    return out